LS-01T-002

Honeywell WA-IRX12-A4 Micro Switch 20A 250V T85 5E4

1.Electrical Rating∶20（3）A250VAC

2.Contact Resistance∶≤50mΩ

3.Operating Force∶113.4～453.6gf（4～16 02）

4.Overtravel∶0.254mmMIN.（.010 IN.MIN.）

5.Reset Operating Force: 907.2gf MAX（32 0Z.MAX）

6.Reset Overtravel∶1.02mmMIN.（.040 IN.MIN.）

7.Withstand Woltage ∶ Between terminal and terminal 500V/5S/5mA；

Between terminals and case 1500/5S/5mA

8.Insulation Resistance∶≥100MQ（Test Voltage 500VDC）

9.Operating Temperature∶-55° to 85°（-67°-185°F）

Send email to us

LS-01T-002

Product Tags

Notes (NOTES):

1. Electrical parameters and UL and CSA symbols (SWITCHMAYBE FURNISHED LESS ELECTRICAL DATA AND UL AND CSA SYMBOL)
2. The maximum outer diameter of the installation hole insert or screw is 3.531mm, Center is 25.4mm (MOUNTINGHOLES WILLACCEPTPINS OR SCREWS OF.139 MAX.DIA.ON 1.000 CENTERS) 3. After the button release, When the reset key presses continuously, The switch function must not automatically convert the switch function (SWITCHWILLNOT RECYCLE OR ACT AS A MOMENTARY ACTION SWITCH IF PINPLUNGER IS RELEASED WHEN RESET PLUNGER IS CONTINUALLY DEPRESSED) to the ④. After the button releases 0.2 from the action position, start the reset button and the switch can reset (SWITCHMUST BE CAPABLE OF BEING RESET WHEN PIN PLUNGER IS RELEASED.008 BASIC FROM OPERATING POSITION)
5. Start the reset key one or two times, and the switch can be reset (SWITCHMAY BERESET BYEITHER ONE ORTWODEPRESSINOSOFTHERESETBUTTON)
6. Draw 3 batch test switches for terminal heating test (N.S. DIV RECEIVING INSPECTION IS
RESPONSIBLE FOR HAVING 3 SWITCH FROM EACH LOT TESTED FOR
TERMINAL HEAD TEST PER RSI-292)
7.OUTSIDE OF SWITCH CASE TO BE MARKED WITH”MICRO “,”WA1R
×12A4,MICRO SWITCH #WA-1R×12-A4 TRIP FREE,MANUAL RESET SWITCH