HK-14-16AP-1118
dpdt micro switch / hade micro switches / 16a dpdt sau biyu hade micro switch
| Halayen ma'anar aiki | Sigar Aiki | Daraja | Raka'a |
 | Matsayin Kyauta FP | 15.9± 0.2 | mm |
| Matsayin Aiki OP | 14.9± 0.5 | mm | |
| Matsayin Sakin RP | 15.2 ± 0.5 | mm | |
| Jimlar Matsayin tafiya | 13.1 | mm | |
| Aiki Force OF | 0.25 ~ 4 | N | |
| Sakin Ƙarfin RF | - | N | |
| Jimlar tafiye-tafiye Force TTF | - | N | |
| Pre Travel PT | 0.5 ~ 1.6 | mm | |
| Over Travel OT | 1.0 Minti | mm | |
| Banbancin Motsi MD | 0.4 max | mm |
Canja Halayen fasaha
| ITEM | ma'aunin fasaha | Daraja | |
| 1 | Tuntuɓi Resistance | ≤30mΩ Ƙimar farko | |
| 2 | Juriya na Insulation | ≥100MΩ500VDC | |
| 3 | Dielectric Voltage | tsakanin tashoshin da ba a haɗa su ba | 1000V/0.5mA/60S |
| tsakanin tashoshi da karfe frame | 3000V/0.5mA/60S | ||
| 4 | Rayuwar Lantarki | ≥50000 hawan keke | |
| 5 | Rayuwar Injiniya | ≥1000000 hawan keke | |
| 6 | Yanayin Aiki | -25 ~ 125 ℃ | |
| 7 | Mitar Aiki | lantarki: 15 hawan keke Makanikai: hawan keke 60 | |
| 8 | Tabbacin Jijjiga | Mitar girgiza: 10 ~ 55HZ; Girma: 1.5mm; Hanyoyi uku: 1H | |
| 9 | Ikon Solder: Fiye da 80% na ɓangaren da aka nutsar da shi za a rufe shi da mai siyarwa | Zazzabi mai siyarwa: 235 ± 5 ℃ Lokacin Nitsewa: 2 ~ 3S | |
| 10 | Solder Heat Resistance | Dip Soldering: 260± 5℃ 5± 1S Siyar da Manual: 300± 5℃ 2 ~ 3S | |
| 11 | Amincewa da Aminci | UL, CSA, VDE, ENEC, TUV, CE, KC, CQC | |
| 12 | Yanayin Gwaji | Yanayin yanayi: 20± 5 ℃ Danshi mai Dangi: 65± 5% RH Hawan iska: 86 ~ 106KPa | |
Canja aikace-aikacen: ana amfani da shi sosai a cikin kayan aikin gida daban-daban, kayan lantarki, kayan aikin sarrafa kansa, kayan sadarwa, na'urorin lantarki, kayan aikin wuta da sauran fannoni.
Kariya don shimfidar wutar lantarki
Canjin wutar lantarki: Game da matakan tsaro don shimfidawa da kuma haɗa wutar lantarki, zan raba tare da ku matakan kariya don shimfidawa da haɗin wutar lantarki a cikin ƙirar mu.
Kariya don shimfidar wutar lantarki
Da farko, har yanzu na ari abubuwan fifiko da yawancin magoya baya masu saurin gudu suka ambata.Ko da shin shimfidawa ne ko fifikon wayoyi, da fatan za a koma ga takardar bayanan guntu.Jagoran gabaɗaya zai ba da bayanin jagorar shimfidawa:
A wannan lokacin, ta yaya za mu auna ƙirar mu?A cikin ƙirar wutar lantarki na yau da kullun, har yanzu akwai wasu ƙwarewar ƙira waɗanda za a iya amfani da su don tunani.
Mataki: Ƙayyade matsayi na ƙirar wutar lantarki akan allon PCB.Maɓallin shine tushen ƙarfi na EMI radiation.Lokacin sanya shi, yakamata ya kasance mai nisa daga abubuwa masu mahimmanci kamar agogo da musaya, sa'an nan kuma a kusanci kusa da tashoshi na lantarki, la'akari da abubuwa kamar zubar da zafi da haɗuwa.
Mataki na 2: Ƙayyade bambanci tsakanin babban tashar wutar lantarki da ƙasa (ƙasa mai ƙarfi, ƙasan sigina da sauran siginar sigina), babban tashar tashar yanzu (ja);bambancin ƙasa (rose ja da cyan);tashar martani (blue)
Matakai guda uku: ainihin abubuwan kowane bangare: sanya matatar shigarwa, bututu mai canzawa, da'ira mai sarrafawa, da abubuwan tace fitarwa.
Canja bututu: Tsarin yana da ɗanɗano, shimfidar wuri yana la'akari da babban tashar ta yanzu, kuma ana iya haɗa filayen shigarwa da fitarwa kai tsaye.
Tacewar shigar shigarwa: kusa da bututun sauya don tabbatar da cewa ana iya tace manyan igiyoyin ruwa kafin shigar da bututun sauya.
Fitar da fitarwa: Kusa da bututun canzawa don tabbatar da cewa an tace manyan igiyoyin ruwa kafin shigar da jirgi guda ɗaya.
Da'irar shigarwa da fitarwa: MOS bututu madauki, madauki bututu mai ƙwanƙwasa ƙanƙanta gwargwadon yiwuwa.
Wutar sarrafa wutar lantarki:
(1) Ana sanya ma'aunin kwatancen da'irar sarrafawa kusa da guntu mai sarrafawa;
(2) Don da'irar samfur na da'irar sarrafawa, ana sanya resistor samfurin tsakanin matatun fitarwa da da'irar kwatanta.Lokacin shimfidawa, tabbatar da cewa da'irar samfur ɗin tana da kusanci kamar yadda zai yiwu ga guntu fil kuma kusa da da'irar kwatanta;
(3) Don cibiyar sadarwar tacewa na da'irar sarrafawa kanta, capacitor ya kamata ya kasance kusa da madaidaicin fil;kuma kayan aikin siginar sarrafawa masu alaƙa yakamata su kasance kusa da guntu.
Tongda Wire Electric Factory yana mai da hankali kan samarwa da tallace-tallace na ƙananan maɓalli, masu hana ruwa mai hana ruwa, na'urorin lantarki na kera motoci, na'urorin wutar lantarki, na'urorin juyawa da sauran samfuran.Babban samfuran su ne micro switch series, waterproof switch series, rotary switch series da dai sauransu.Kayayyakin Tongda sun sami takaddun shaida na UL / CUL a Amurka, takaddun shaida na VDE / TUV a Jamus, takaddun shaida na Nordic huɗu, takaddun EK / KTL a Koriya ta Kudu da takaddun shaida CQC a China;Ana amfani da samfuran da yawa a cikin kayan aikin gida kamar su talabijin, injin waken soya, tanda microwave, injin ruwan 'ya'yan itace, da sauransu. Don motoci da kayan aikin lantarki, ƙarfin samarwa na shekara-shekara ya fi masu sauyawa miliyan 100.Kamfanin yana aiwatar da ingantaccen kulawa mai inganci, yana ci gaba da haɓaka ingancin samfur, kuma yana ba abokan ciniki samfuran gasa da sabis masu gamsarwa.Barka da zuwa tuntuba.
