HK-14-16A-006
micro sauya 15a 250v gajeren hinge lever abin nadi micro sauya micro scrollers tare da sauya KW3
Girman ginshiƙi
Canja aikin Halaye
| Halayen ma'anar aiki | Sigar Aiki | Daraja | Raka'a |
 | Matsayin KyautaFP | 15.9± 0.2 | mm |
| Matsayin AikiOP | 14.9± 0.5 | mm | |
| Matsayin SakiRP | 15.2 ± 0.5 | mm | |
| Jimlar Matsayin tafiya | 13.1 | mm | |
| Karfin AikiOF | 0.25 ~ 4 | N | |
| Ƙarfin SakinRF | - | N | |
| Jimlar Ƙarfin balaguroTTF | - | N | |
| Kafin TafiyaPT | 0.5 ~ 1.6 | mm | |
| Over TravelOT | 1.0 Minti | mm | |
| Banbancin MotsiMD | 0.4 max | mm |
Canja Halayen fasaha
| ITEM | ma'aunin fasaha | Daraja | |
| 1 | Tuntuɓi Resistance | ≤30mΩ Ƙimar farko | |
| 2 | Juriya na Insulation | ≥100MΩ500VDC | |
| 3 | Dielectric Voltage | tsakanin tashoshin da ba a haɗa su ba | 1000V/0.5mA/60S |
| tsakanin tashoshi da karfe frame | 3000V/0.5mA/60S | ||
| 4 | Rayuwar Lantarki | ≥50000 hawan keke | |
| 5 | Rayuwar Injiniya | ≥1000000 hawan keke | |
| 6 | Yanayin Aiki | -25 ~ 125 ℃ | |
| 7 | Mitar Aiki | lantarki:15hawan keke Makanikai:60hawan keke | |
| 8 | Tabbacin Jijjiga | Mitar girgiza: 10 ~ 55HZ; Girma: 1.5mm; Hanyoyi uku: 1H | |
| 9 | Ikon Solder: Fiye da 80% na ɓangaren da aka nutsar da shi za a rufe shi da mai siyarwa | Zazzabi mai siyarwa: 235 ± 5 ℃ Lokacin Nitsewa: 2 ~ 3S | |
| 10 | Solder Heat Resistance | Dip Soldering: 260± 5℃ 5± 1S Siyar da Manual: 300± 5℃ 2 ~ 3S | |
| 11 | Amincewa da Aminci | UL, CSA, VDE, ENEC, TUV, CE, KC, CQC | |
| 12 | Yanayin Gwaji | Yanayin yanayi: 20± 5 ℃ Danshi mai Dangi: 65± 5% RH Hawan iska: 86 ~ 106KPa | |
Canja aikace-aikacen: ana amfani da shi sosai a cikin kayan aikin gida daban-daban, kayan lantarki, kayan aikin sarrafa kansa, kayan sadarwa, na'urorin lantarki, kayan aikin wuta da sauran fannoni.
Gabatarwar Micro Switch
Ana amfani da ƙananan maɓalli don sarrafawa ta atomatik da kariyar aminci a cikin kayan aiki waɗanda ke buƙatar sauyawa akai-akai.Ana amfani da su sosai a cikin kayan lantarki, kayan aiki, ma'adinai, tsarin wutar lantarki, na'urorin gida, kayan lantarki, da sararin samaniya, jiragen sama, jiragen ruwa, makamai masu linzami, da filayen soja kamar tankuna da aka yi amfani da su sosai a cikin filayen da ke sama.
Ko da yake sauyawa yana da ƙananan, yana taka rawar da ba za a iya maye gurbinsa ba.
Micro Switch
A kan raƙuman ruwa, lokacin da aka yi gudun hijira zuwa wuri mai mahimmanci, ana haifar da wani aiki na gaggawa, don haka madaidaicin maɗaukaki da ƙayyadaddun lamba a ƙarshen raƙuman motsi suna haɗuwa da sauri ko cire haɗin.
Lokacin da aka cire ƙarfin da ke kan sashin watsawa, aikin Reed yana haifar da jujjuya aikin.Lokacin da juzu'in jujjuyawar sashin watsawa ya kai ga mahimmin ma'auni na aikin sandar, ana yin juzu'i nan take.Nisan tuntuɓar maɓalli na ƙarami kaɗan ne, bugun aikin ɗan gajeren lokaci ne, ƙarfin latsawa kaɗan ne, kuma kashewa yana da sauri.Gudun motsi na hulɗar motsi ba shi da alaƙa da saurin motsi na ɓangaren watsawa.
Maɓalli na micro yana da ɗan ƙaramin tazarar lamba da tsarin ɗaukar hoto,
Hanyar tuntuɓar da ke kunnawa da kashewa tare da ƙayyadaddun bugun jini da ƙayyadaddun ƙarfi an lulluɓe shi da murfi,
Nau'in sauyawa tare da sandar tuƙi a waje.Saboda nisan tuntuɓar na'urar yana da ɗan ƙaramin ƙarfi, ana kiran shi micro switch, wanda kuma ake kira maɓalli mai mahimmanci.
Alamar rubutun lantarki ita ce: SM
ka'idar aiki
Ƙarfin inji na waje yana aiki akan aikin ta hanyar abubuwan watsawa (filin turawa, maɓalli, levers, rollers, da sauransu)
11
