China Wholesale Micro Switch On Off Manufacturers - DK4-DT-017 – Tongda
China Wholesale Micro Switch On Off Manufacturers - DK4-DT-017 – Tongda Detail:
(The defining characteristics of operation) |
(Operating Parameter) |
(Abbreviation) |
(Units) |
|
(Free Position) |
FP |
mm |
(Operating Position) |
OP |
mm |
|
(Releasing Position) |
RP |
mm |
|
(Total travel Position) |
TTP |
mm |
|
(Operating Force) |
OF |
N |
|
(Releasing Force) |
RF |
N |
|
(Total travel Force) |
TTF |
N |
|
(Pre Travel) |
PT |
mm |
|
(Over Travel) |
OT |
mm |
|
(Movement Differential) |
MD |
mm |
Switch technical Characteristics
(ITEM) |
(technical parameter) |
(Value) |
|
1 |
(Electrical Rating) | 10(1.5)A 250VAC | |
2 |
(Contact Resistance) | ≤50mΩ( Initial value) | |
3 |
(Insulation Resistance) | ≥100MΩ(500VDC) | |
4 |
(Dielectric Voltage) | (between non-connected terminals) | 500V/0.5mA/60S |
(between terminals and the metal frame) | 1500V/0.5mA/60S | ||
5 |
(Electrical Life) | ≥10000 cycles | |
6 |
(Mechanical Life) | ≥3000000 cycles | |
7 |
(Operating Temperature) | -25~105℃ | |
8 |
(Operating Frequency) | (electrical):15 cycles(Mechanical):60 cycles | |
9 |
(Vibration Proof) |
(Vibration Frequency):10~55HZ; (Amplitude):1.5mm; (Three directions):1H |
|
10 |
(Solder Ability): (More than 80% of immersed part shall be covered with solder) | (Soldering Temperature):235±5℃(Immersing Time):2~3S | |
11 |
(Solder Heat Resistance) | (Dip Soldering):260±5℃ 5±1S(Manual Soldering):300±5℃ 2~3S | |
12 |
(Safety Approvals) |
UL、CSA、TUV、ENEC |
|
13 |
(Test Conditions) | (Ambient Temperature):20±5℃(Relative Humidity):65±5%RH
(Air Pressure):86~106KPa |
Product detail pictures:
Related Product Guide:
High-quality comes 1st; support is foremost; business is cooperation" is our small business philosophy which is regularly observed and pursued by our organization for China Wholesale Micro Switch On Off Manufacturers - DK4-DT-017 – Tongda , The product will supply to all over the world, such as: Jakarta , Czech , Ottawa , We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Dora from Uruguay - 2017.08.18 18:38
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Elaine from Mexico - 2018.04.25 16:46
Write your message here and send it to us