sales01@tdweipeng.com / 0086-577-57158583
China
English
China Wholesale Micro Momentary Push Button Switch Manufacturers - DK4-BZ-002 – Tongda Featured Image
  • China Wholesale Micro Momentary Push Button Switch Manufacturers - DK4-BZ-002 – Tongda

China Wholesale Micro Momentary Push Button Switch Manufacturers - DK4-BZ-002 – Tongda


China Wholesale Micro Momentary Push Button Switch Manufacturers - DK4-BZ-002 – Tongda

Product Tags

Related Video

Feedback (2)

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Normally Open Push Button Switch , Micro Pressure Switch , Micro Switches , We usually concertrating on acquiring new creative products to fulfill request from our clientele all around the world. Be a part of us and let's make driving safer and funnier jointly!
China Wholesale Micro Momentary Push Button Switch Manufacturers - DK4-BZ-002 – Tongda Detail:

DK4-BZ-002-

(The defining characteristics of operation)

(Operating Parameter)

(Abbreviation)

 (Units)

 pdd

 (Free Position)

FP

mm
(Operating Position)

OP

mm
(Releasing Position)

RP

mm
(Total travel Position)

TTP

mm
(Operating Force)

OF

N
(Releasing Force)

RF

N
(Total travel Force)

TTF

N
(Pre Travel)

PT

mm
(Over Travel)

OT

mm
(Movement Differential)

MD

mm

Switch technical Characteristics

（ITEM）

（technical parameter）

（Value）

1

 （Electrical Rating） 10(1.5)A 250VAC

2

 （Contact  Resistance） ≤50mΩ( Initial value)

3

 (Insulation Resistance) ≥100MΩ(500VDC)

4

 （Dielectric Voltage） （between non-connected terminals） 500V/0.5mA/60S
(between terminals and the metal frame) 1500V/0.5mA/60S

5

 (Electrical Life) ≥10000 cycles

6

 (Mechanical Life) ≥3000000 cycles

7

 （Operating Temperature） -25～105℃

8

 （Operating Frequency） （electrical）:15 cycles（Mechanical）:60 cycles

9

 （Vibration Proof）

（Vibration Frequency）：10～55HZ；

（Amplitude）：1.5mm;

（Three directions）:1H

10

 (Solder Ability): (More than 80% of immersed part shall be covered with solder) (Soldering Temperature)：235±5℃(Immersing Time)：2～3S

11

 （Solder Heat Resistance） （Dip Soldering）：260±5℃ 5±1S（Manual Soldering）：300±5℃ 2～3S

12

 （Safety Approvals）

UL、CSA、TUV、ENEC

13

 （Test Conditions） （Ambient Temperature）：20±5℃（Relative Humidity）：65±5%RH

（Air Pressure）：86～106KPa

Analysis of the overall operation flow of the micro switch

The overall operation process of the micro switch is detailed:
①Operating pressure OF: It is added to the button or the actuator to make the switch produce the maximum force required for forward action (connecting or disconnecting the circuit).
②Reverse operating force RF: The minimum force that the button or actuator can bear when the switch is reversed (disconnected or connected to the circuit).
③Contact pressure TF: The pressure of the static contact point when the button or actuator part is in the free position, or the pressure of the dynamic contact point when the button actuator part is in the limit position.
④Free position FP: The position from the highest point of the button or actuator to the base line of the switch mounting hole when the switch is in the normal state and is not subject to external force.
⑤Operation position OP: When the switch button or actuator component is in a positive action, the position from the highest point of the button or actuator component to the base line of the switch mounting hole.
⑥Restore position RP: When the switch button or actuator component is in reverse action, the position from the highest point of the button or actuator component to the base line of the switch mounting hole.
⑦Total movement TTP: The maximum position that the switch button or actuator component can allow to move when it is working.
⑧ Action stroke PT: The maximum distance from the free position of the switch button or actuator to the positive action position.
⑨ Overrun travel OT: The switch button or actuator component continues to move downward from the positive action position, and the distance to the limit position that does not end or damage the mechanical performance of the switch, usually takes the minimum value.

Product detail pictures:

China Wholesale Micro Momentary Push Button Switch Manufacturers - DK4-BZ-002 – Tongda detail pictures

Related Product Guide:
We also provide item sourcing and flight consolidation solutions. We have now our very own manufacturing facility and sourcing place of work. We could provide you with nearly every kind of merchandise associated to our merchandise variety for China Wholesale Micro Momentary Push Button Switch Manufacturers - DK4-BZ-002 – Tongda , The product will supply to all over the world, such as: Islamabad , Nigeria , El Salvador , With the principle of win-win, we hope to help you make more profits in the market. An opportunity is not to be caught, but to be created. Any trading companies or distributors from any countries are welcomed.
    • In our cooperated wholesalers, this company has the best quality and reasonable price, they are our first choice.
    5 Stars By Heather from UK - 2017.09.30 16:36
    The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
    5 Stars By Anna from Mecca - 2017.01.28 18:53
    Write your message here and send it to us

    related products