China Wholesale Electrical Rocker Suppliers - DK4-BT-014 – Tongda
China Wholesale Electrical Rocker Suppliers - DK4-BT-014 – Tongda Detail:
(The defining characteristics of operation) |
(Operating Parameter) |
(Abbreviation) |
(Units) |
|
(Free Position) |
FP |
mm |
(Operating Position) |
OP |
mm |
|
(Releasing Position) |
RP |
mm |
|
(Total travel Position) |
TTP |
mm |
|
(Operating Force) |
OF |
N |
|
(Releasing Force) |
RF |
N |
|
(Total travel Force) |
TTF |
N |
|
(Pre Travel) |
PT |
mm |
|
(Over Travel) |
OT |
mm |
|
(Movement Differential) |
MD |
mm |
Switch technical Characteristics
(ITEM) |
(technical parameter) |
(Value) |
|
1 |
(Electrical Rating) | 10(1.5)A 250VAC | |
2 |
(Contact Resistance) | ≤50mΩ( Initial value) | |
3 |
(Insulation Resistance) | ≥100MΩ(500VDC) | |
4 |
(Dielectric Voltage) | (between non-connected terminals) | 500V/0.5mA/60S |
(between terminals and the metal frame) | 1500V/0.5mA/60S | ||
5 |
(Electrical Life) | ≥10000 cycles | |
6 |
(Mechanical Life) | ≥3000000 cycles | |
7 |
(Operating Temperature) | -25~105℃ | |
8 |
(Operating Frequency) | (electrical):15 cycles(Mechanical):60 cycles | |
9 |
(Vibration Proof) |
(Vibration Frequency):10~55HZ; (Amplitude):1.5mm; (Three directions):1H |
|
10 |
(Solder Ability): (More than 80% of immersed part shall be covered with solder) | (Soldering Temperature):235±5℃(Immersing Time):2~3S | |
11 |
(Solder Heat Resistance) | (Dip Soldering):260±5℃ 5±1S(Manual Soldering):300±5℃ 2~3S | |
12 |
(Safety Approvals) |
UL、CSA、TUV、ENEC |
|
13 |
(Test Conditions) | (Ambient Temperature):20±5℃(Relative Humidity):65±5%RH
(Air Pressure):86~106KPa |
Product detail pictures:
Related Product Guide:
Fast and great quotations, informed advisers to help you choose the correct solution that suits all your requirements, a short creation time, responsible top quality manage and distinct providers for paying and shipping affairs for China Wholesale Electrical Rocker Suppliers - DK4-BT-014 – Tongda , The product will supply to all over the world, such as: Washington , Naples , Tanzania , So far our merchandise have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have now 13years experienced sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to provide our customers with high quality items and excellent service.
By Joyce from Germany - 2018.09.21 11:01
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Annabelle from Florida - 2017.06.22 12:49
Write your message here and send it to us