HK-04G AT
Chinja chiito Hunhu
| Izvo zvinotsanangura maitiro ekushanda | Operating Parameter | Kudimburira | Units | Value |
 | Free Position | FP | mm | 12.1±0.2 |
| Operating Position | OP | mm | 11.5±0.5 | |
| Releasing Position | RP | mm | 11.7±0.5 | |
| Total travel Position | TTP | mm | 10.7 | |
| Operating Force | OF | N | 1.0~3.5 | |
| Kusunungura Simba | RF | N | - | |
| Total kufamba Force | TTF | N | - | |
| Pre Travel | PT | mm | 0.3~1.0 | |
| Over Travel | OT | mm | 0.2Min | |
| Movement Differential | MD | mm | 0.4Max |
Chinja technical Characteristics
| ITEM | technical parameter | Value | |
| 1 | Yemagetsi Rating | 5A/10A 250VAC | |
| 2 | Bata Resistance | ≤50mΩKukosha kwekutanga | |
| 3 | Insulation Resistance | ≥100MΩ500VDC | |
| 4 | Dielectric Voltage | pakati pezvisina kubatanidzwa zviteshi | 500V/0.5mA/60S |
| pakati pematerminals nesimbi frame | 1500V/0.5mA/60S | ||
| 5 | Upenyu hweMagetsi | ≥10000 kutenderera | |
| 6 | Mechanical Life | ≥100000 kutenderera | |
| 7 | Operating Temperature | 0 ~ 125 ℃ | |
| 8 | Operating Frequency | zvemagetsi:15cyclesMechanical:60cycles | |
| 9 | Vibration Uchapupu | Vibration Frequency: 10 ~ 55HZ; Amplitude: 1.5mm; Nheyo nhatu:1H | |
| 10 | Solder Ability: Inopfuura 80% yechikamu chakanyudzwa ichavharwa ne solder | Soldering Tembiricha:235±5℃Kunyudza Nguva:2~3S | |
| 11 | Solder Heat Resistance | Dip Soldering:260±5℃ 5±1SManual Soldering:300±5℃ 2~3S | |
| 12 | Zvibvumirano Zvekuchengetedza | UL,CSA,VDE,ENEC,CE | |
| 13 | Test Conditions | Ambient Tembiricha:20±5℃Relative Humidity:65±5%RH Mhepo Dzvinyiriro:86 ~ 106KPa | |
Chinja application: inoshandiswa zvakanyanya mumidziyo yakasiyana yemumba, midziyo yemagetsi, otomatiki midziyo, midziyo yekutaurirana, zvemagetsi zvemotokari, maturusi emagetsi nemimwe minda.
11
Nyora meseji yako pano ugotitumira
