HK-14-1X-16A-200
WEIPENG HK-14 Kullum yana buɗe spdt micro switch 16A 250VAC
Girman ginshiƙi
Canja aikin Halaye
| Halayen ma'anar aiki | Sigar Aiki | Daraja | Raka'a |
 | Matsayin KyautaFP | 15.9± 0.2 | mm |
| Matsayin AikiOP | 14.9± 0.5 | mm | |
| Matsayin SakiRP | 15.2 ± 0.5 | mm | |
| Jimlar Matsayin tafiya | 13.1 | mm | |
| Karfin AikiOF | 0.25 ~ 4 | N | |
| Ƙarfin SakinRF | - | N | |
| Jimlar Ƙarfin balaguroTTF | - | N | |
| Kafin TafiyaPT | 0.5 ~ 1.6 | mm | |
| Over TravelOT | 1.0 Minti | mm | |
| Banbancin MotsiMD | 0.4 max | mm |
Canja Halayen fasaha
| ITEM | ma'aunin fasaha | Daraja | |
| 1 | Tuntuɓi Resistance | ≤30mΩ Ƙimar farko | |
| 2 | Juriya na Insulation | ≥100MΩ500VDC | |
| 3 | Dielectric Voltage | tsakanin tashoshin da ba a haɗa su ba | 1000V/0.5mA/60S |
| tsakanin tashoshi da karfe frame | 3000V/0.5mA/60S | ||
| 4 | Rayuwar Lantarki | ≥50000 hawan keke | |
| 5 | Rayuwar Injiniya | ≥1000000 hawan keke | |
| 6 | Yanayin Aiki | -25 ~ 125 ℃ | |
| 7 | Mitar Aiki | lantarki:15hawan keke Makanikai:60hawan keke | |
| 8 | Tabbacin Jijjiga | Mitar girgiza: 10 ~ 55HZ; Girma: 1.5mm; Hanyoyi uku: 1H | |
| 9 | Ikon Solder: Fiye da 80% na ɓangaren da aka nutsar da shi za a rufe shi da mai siyarwa | Zazzabi mai siyarwa: 235 ± 5 ℃ Lokacin Nitsewa: 2 ~ 3S | |
| 10 | Solder Heat Resistance | Dip Soldering: 260± 5℃ 5± 1S Siyar da Manual: 300± 5℃ 2 ~ 3S | |
| 11 | Amincewa da Aminci | UL, CSA, VDE, ENEC, TUV, CE, KC, CQC | |
| 12 | Yanayin Gwaji | Yanayin yanayi: 20± 5 ℃ Danshi mai Dangi: 65± 5% RH Hawan iska: 86 ~ 106KPa | |
Canja aikace-aikacen: ana amfani da shi sosai a cikin kayan aikin gida daban-daban, kayan lantarki, kayan aikin sarrafa kansa, kayan sadarwa, na'urorin lantarki, kayan aikin wuta da sauran fannoni.
Daban-daban na micro switches
Ƙaƙƙarfan maɓalli shine hanyar tuntuɓar wanda ke da ɗan ƙaramin tazarar tuntuɓar sadarwa da tsarin ɗaukar hoto, kuma yana amfani da ƙayyadadden bugun jini da ƙayyadadden ƙarfi don canza hanyar sadarwar.An rufe shi da harsashi kuma yana da sandar tuƙi a wajensa.Lantarki na Kudu maso Gabas zai gabatar da nau'ikan maɓalli daban-daban a ƙasa.
Kudu maso Gabas Electronics
Ƙarfin injina na waje na micro switch yana aiki akan reed reed ta hanyar abubuwan watsawa (latsa fil, maɓalli, levers, rollers, da sauransu).Lokacin da aka watsar da sandar aikin zuwa wuri mai mahimmanci, zai haifar da mataki na gaggawa, yin hulɗar motsi a ƙarshen aikin.Haɗa da sauri ko cire haɗin tare da kafaffun lambobi.
Lokacin da aka cire ƙarfin da ke kan sashin watsawa na micro switch, aikin Reed yana haifar da jujjuya aikin.Lokacin da juzu'in jujjuyawar sashin watsawa ya kai ga mahimmin ma'auni na aikin sandar, ana yin juzu'i nan take.Nisan tuntuɓar maɓalli na ƙarami kaɗan ne, bugun aikin ɗan gajeren lokaci ne, ƙarfin latsawa kaɗan ne, kuma kashewa yana da sauri.Gudun motsi na hulɗar motsi ba shi da alaƙa da saurin motsi na ɓangaren watsawa.
Akwai nau'ikan micro switches da yawa, kuma akwai ɗaruruwan sifofi na ciki.An raba su zuwa talakawa, ƙanana da ƙananan ƙananan bisa ga girman;bisa ga aikin kariyar, an raba su zuwa mai hana ruwa, ƙura, da fashewa;bisa ga nau'in karya, akwai nau'in haɗin kai guda ɗaya, nau'i biyu, nau'in haɗin kai da yawa.A halin yanzu, akwai kuma mai ƙarfi micro switch na cire haɗin (lokacin da redi na sauya baya aiki, ƙarfin waje kuma yana iya sa na'urar ta cire haɗin).
Micro switches ana rarraba su zuwa nau'in talakawa, nau'in DC, nau'in micro current, da nau'in mai girma na yanzu gwargwadon iyawarsu.Dangane da yanayin amfani, akwai nau'ikan talakawa, nau'in juriya mai zafin jiki (250 ℃), nau'in yumbu mai jure zafin jiki (400 ℃).Asalin nau'in micro switch gabaɗaya ba tare da abin da aka makala ba, kuma yana samun ƙaramin nau'in bugun jini da babban nau'in bugun jini.Za'a iya ƙara kayan haɗi daban-daban na latsa matsi bisa ga buƙatu.Dangane da kayan haɗi daban-daban da aka ƙara, za'a iya raba canzawa zuwa nau'ikan daban-daban kamar nau'in maballin, nau'in mawallen roller, takaice bom, da sauransu.
11
